X hits on this document

9 views

0 shares

0 downloads

0 comments

3 / 3

LOADING DOCK SAFETY CHECKLIST

Y

N

COMMENTS

3.Are seals or shelters designed so that they will not obstruct loading and unloading

4.Are dock levelers weather sealed along the sides and back

5.In addition to seals or shelters, would an air curtain solve a problem

6.Do seals or shelters need repair or replacement   (List door numbers.)

I.TRAILER LIFTING

1.How are low-bed trailers elevated for loading/unloading

  Wheel risers   Concrete ramps

  Trailer-mounted jacks  Truck levelers

2.Do lifting devices provide adequate stability

3.Are trailers secured with vehicle restraints when elevated

4.Do lifting devices need repair or replacement   (List door numbers.)

J.OTHER CONSIDERATIONS

1.Is lighting adequate inside trailers

2.Are proper tools available for applying strapping

3.Do workers cut strapping using only cutters equipped with a hold-down device

4.Do workers wear hand, foot  and face protection when applying and cutting strapping

5.Are all appropriate workers trained in safe strapping techniques

6.Are dock workers trained in safe lifting and manual handling techniques

7.Are pallets regularly inspected

8.Are dock bumpers in good repair

9.Is the dock kept clean and free of clutter

10.Are housekeeping inspections performed periodically

11.Are anti-skid floor surfaces, mats or runners used where appropriate

12.Are stairways or ladders provided for access to ground level from the dock

13.Are dock approaches free of potholes or deteriorated pavement

14.Is the trailers landing strip in good condition

15.Are dock approaches and outdoor stairs kept clear of ice and snow

16.Are dock positions marked with lines or lights for accurate trailer spotting

17.Do all dock workers wear personal protective equipment as required by company policy

18.Is safety training provided for all dock employees

19.Are periodic safety refresher courses offered

CKL:14-3

Document info
Document views9
Page views9
Page last viewedTue Oct 25 21:41:30 UTC 2016
Pages3
Paragraphs112
Words847

Comments