X hits on this document

790 views

0 shares

0 downloads

0 comments

123 / 324

Build Different. Build Bctter.

sM

d.

e.

8" Concrete Width: 22" & 10" L x 13" W x 16" H-2 1/2" Thick EPS 10" Concrete Width: 22" & 10" L x 15" W x 16" H-2 1/2" Thick EPS 11" Ledge Form Unit 13" Ledge Form Unit 11"TaperTop Form 13" Taper Top Form

B.

BRACING, ALIGNMENT &SCAFFOLD SYSTEM

As an integral installation component of an insulating concrete form system an adjustable metalscaffolding support and wall alignmentsystem shall be provided.

1.

2.

A device with adequate degrees of adjustment to ensure the completed insulating concrete form system walls are plumb after the placement and consolidation of concrete. .An OSHA compliant scaffold support system to facilitate proper stacking of forms and

3.

placement of concrete. System adequate to reinforce and protect completed insulating concrete form

installation prior to the attachment of structural elements to protect from

wind

damage.

'

.

A.

Steel reinforcement shall be as specified in Section 03 21 00 and shall be supplied under that section for placement by the insulating concrete form installer.

B.

LINTEL DESCRIPTION

Lintels to be installed as specified or detailed by the structural engineer in conjunction with the insulating concrete form manufacturer'sinstallation manual guidelines. Size and placement of top and bottom bending steel, stirrups for shear reinforcement and corner reinforcing to be verified with engineering design prior to concrete placement.

    • 2.02

      CONCRETE

      • A.

        Concrete supplied under Section 03 30 00 shall be of strength as specified by the design engineer (measured at 28 days). Recommended aggregate size to be 3/8" minimum and 3/4" maximum.

  • B.

    Recommended concrete slump is 5.5" to 6.5"

    • 2.03

      STEEL REINFORCEMENT

C. STRUCTURAL ANGLE IRON FOR BRICK LEDGE SUPPORT

Brick ledge support reinforcing steel to be sized, formed and placed in accordance with structural engineer's specifications and details for the given project installation parameters.

Issued on: lOn12005 Release: G

6

i

\ !

, !

Document info
Document views790
Page views790
Page last viewedTue Dec 06 18:24:09 UTC 2016
Pages324
Paragraphs11037
Words86316

Comments