X hits on this document

1529 views

0 shares

0 downloads

0 comments

153 / 324

11103 (R 05/06)

SECTION 061753 - SHOP-FABRICATED WOOD TRUSSES

PART 1 - GENERAL

1.1

SUMMARY

A.

This Section includes the following:

1. 2. 3. 4. 5 .

Wood roof trusses. Wood floor trusses. Wood girder trusses. Wood truss bracing. Metal truss accessories

.

1.2

PERFORMANCE REQUIREMENTS

A.

Structural Performance: Provide metal-plate-connected wood design loads within limits and under conditions indicated. TPI1.

trusses capable

of withstanding

Comply with

requirements in

    • 1.3

      SUBMITTALS

      • A.

        Product Data: For metal-plate connectors, metal truss accessories, and fasteners.

      • B.

        Shop Drawings: Show fabrication and installation details for trusses.

    • 1.

      Show location, pitch, span, camber, configuration, and spacing for each type of truss

required.

    • 2.

      Indicate sizes, stress grades, and species of lumber.

    • 3.

      Indicate locations of permanent bracing required to prevent buckling of individual truss members due to design loads.

    • 4.

      Indicate type, size, material, finish, design values, orientation, and location of metal connector plates.

    • 5.

      Show splice details and bearing details.

    • 6.

      For installed products indicated to comply with design loads, include structural analysis data signed and sealed by the qualified professional engineer responsible for their preparation.

  • C.

    LEED Submittal:

1.

Certificates for Credit MR 7: Chain-of-custody certificates certifying that wood used to produce metal-piate-connected wood trusses complies with forest certification requirements. Include evidence that mill is certified for chain of custody by an FSC accredited certification body.

a.

Include statement indicating costs for each certified wood product.

SHOP-FABRICATED WOOD TRUSSES

061753··1

Document info
Document views1529
Page views1529
Page last viewedSun Jan 22 16:42:28 UTC 2017
Pages324
Paragraphs11037
Words86316

Comments