X hits on this document

952 views

0 shares

0 downloads

0 comments

158 / 324

Section 06200

FINISH CARPENTRY AND MILLWORK

Part 1

GENERAL

l.01

SCOPE OF WORK

    • A.

      The Contractor shall provide all labor, materials, tools and equipment required to furnish and install finish carpentry items, other than shop prefabricated case work, hardware and attachment accessories, as described in this section and as shown on the Contract Drawings.

      • 1.02

        SUBMITTALS

    • A.

      The Contractor shall provide Millwork descriptive submittals in accordance with the provisions of Section 01001 of these Specifications. Submittals include, but are not limited to, the following:

      • 1.

        Shop Drawings: Indicate materials, component profiles, fastening methods, jointing details, finishes and accessories. Samples: Submit two 6 x 12 inch size samples illustrating wood grain and specified finish.

      • 1.03

        QUALITY ASSURANCE

    • A.

      Performance in accordance with AWI Premium quality.

      • 1.04

        REGULATORY REQUIREMENTS

        • A.

          Conform to UBC and ANSI code for fire retardant requirements.

Part 2 PRODUCTS

    • 2.01

      LUMBER MATERIALS

      • A.

        Softwood Lumber: PS 20; Graded in accordance With AWl Custom, rotary sawn, maximum moisture content of 6 percent, with vertical grain and ofquality suitable for transparent finish.

      • B.

        Hardwood Lumber: Graded in accordance with AWI Custom rotary sawn, maximum moisture content of 8 percent, with vertical grain, and of quality suitable for transparent finish.

      • C.

        Lumber for transparent finish: Use pieces made of solid lumber stock; Birch Species. Glued up lumber at Contractors option for painted finish.

      • D.

        Exterior standing and running trim: Ponderosa Pine, C select. (U.O.N. on Construction Docs)

      • E.

        Interior standing and running trim: MDF (U.O.N. on Construction Documents).

Section 06200 1

Document info
Document views952
Page views952
Page last viewedSun Dec 11 06:57:18 UTC 2016
Pages324
Paragraphs11037
Words86316

Comments