X hits on this document

720 views

0 shares

0 downloads

0 comments

159 / 324

Section 06200

    • 2.02

      SHEET MATERIALS

      • A.

        Softwood Plywood: PS 1 Grade C-D; Graded in accordance with AWl, veneer core.

      • B.

        Hardwood Plywood: HPMA HP Grade Type PS 51; Graded in accordance with AWl, veneer core, type of glue recommended for application.

    • 2.03

      ACCESSORIES

      • A.

        Fasteners: Size and type to suit application; Hot dipped galvanized steel for exterior, high humidity and treated wood locations, plain finish elsewhere.

      • B.

        Contact Adhesives: Water Base type.

      • C.

        Wall Adhesive: Cartridge type, compatible with wall substrate, capable of achieving durable bond.

Part 3 -- EXECUTION

    • 3.01

      EXAMINATION AND PREPARATION

      • A.

        Prime paint surfaces of items or assemblies in contact with cementious materials, before installation.

    • 3.02

      INSTALLATION

      • A.

        Install work in accordance with AWl Custom Quality Standard.

      • B.

        Set and secure materials and components in place, plumb and level.

      • C.

        Install trim by nails.

      • D.

        Cover exposed edges of shelving with 3;4 inch thick hardwood edging.

      • E.

        Install hardware in accordance with manufacturers instruction. Apply plastic laminate finishes with adhesive over entire surface.

    • 3.03

      PREPARATION FOR FINISH

      • A.

        Sand work smooth and set exposed fasteners. Apply wood filler in exposed fastener indentations.

      • B.

        Site Finishing: Refer to Section 09900.

END OF SECTION

Section 06200 2

Document info
Document views720
Page views720
Page last viewedSun Dec 04 10:27:58 UTC 2016
Pages324
Paragraphs11037
Words86316

Comments