Submit installer qualifications.
Manufacturer Qualifications: Company with minimum three years experience
manufacturing specified products.
Installer Qualifications: Utilize an installer having demonstrated experience on projects of similar size and complexity, and trained by the manufacturer.
Construct mock-up, 4 feet long by 4 feet wide, including substrate construction.
Locate where directed.
If approved by Architect, mock-up may remain as part of the Work.
Conform to applicable code requirements for flame and smoke ratings and non combustibility as applicable.
Formaldehyde: Products containing urea-formaldehyde shall not be permitted.
Chlorofluorocarbons (CFCs)/HCFCs: Products and equipment requiring or using CFCs or HCFCs during the manufacturing process shall not be permitted.
Airtightness: Install to meet requirements of the Energy Star Program of 1.5 Air Changes/Hour at 50 Pa and a maximum air permeance of 0.02 Lls-m2 at 75 Pa as per ASTM E 283 or ASTM E 2178.
DELIVERY, STORAGE, AND HANDLING
Store products in manufacturer's unopened packaging until ready for installation.
Store products in protected area not exposed to weather and at temperature
conditions recommended by manufacturer.
Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
PART 2 PRODUCTS
Acceptable Manufacturer: Icynene Inc., which is located at: 6747 Campobello Rd. Mississauga, ON, Canada L5N 2L7; Toll Free Tel: 800-758-7325; Tel: 905-363 4040; Fax: 905-363-0102; Email: email@example.com; Web: www.icynene.com
Requests for substitutions will be considered in accordance with provisions of Section 01600.