Section 08110 Steel Doors and Frames
Therma-Tru® Multi-Family and Light Commercial steel doors and frames
PART 1 GENERAL
Section Includes: Steel doors, steel frames, louvers, transoms, sidelites and decorative glass and patio doors
Related sections include:
Masonry: Division 4 Masonry sections.
Carpentry: Division 6
Sealants: Division 7 Joint Sealer Section.
Glass and Glazing: Division 8 Glass and Glazing Section
Hardware: Division 8 Hardware Section
Drywall construction: Division 9 Wall Board Assemblies Section.
Painting: Division 9 Painting Sections
General: Standards listed by reference including revisions by issuing authority, form a part of this specification section to the extent indicated. Standards listed are identified by the issuing authority, authority abbreviation, designation number, title or other designation, title or other designation established by issuing authority.
American Society for testing and Materials (ASTI\Il):
ASTM A366 Standard Specification for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum percent) Cold-Rolled.
ASTM A 653 Standard Specification for Steel Sheet Zinc Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot Dip process.
ASTM A924 Standard Specification for General Requirements for steel sheet, metallic Coated by the Hot-Dip process.
ASTM D610 Standard Test Method for Evaluating Degree of Rust on Painted Steel Surfaces.
ASTM D714 Standard Test Method for Evaluating Degree of Blistering of Paints.
ASTM D1622 Standard Test Method for Apparent Density of Rigid Cellular Plastics.
ASTM D1654 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments.
Section 3A -- 1