American National Standards Institute (ANSI):
ANSIjDHI A115.IG Installation Guide for Doors and Hardware.
ANSIjSDI Standard A224.1 Test Procedure and Test Criteria for Prime Painted Steel Surfaces for Steel Doors and Frames.
Window and door Manufacturer's Association (WDMA)
Warnock Hersey, Inc. (WHI):
WHI Directory of Listed Products.
WHI Directory of Positive Pressure-Rated Door Assemblies and Components
SpecDirect web based listing of fire-rated components and systems.
A. Performance Requirements: provide metal doors and frames which have been manufactured, fabricated and installed to maintain performance criteria stated by the manufacturer without defects, damage or failure.
A. General: Submit listed submittals in accordance with Conditions of the Contract and Division 1 Submittals Procedures Section.
Product Data: Submit Product Data, including manufacturers' product sheet for specified products.
Shop Drawings: Submit Shop Drawings showing layout, profiles and product components including anchorage and accessories.
Indicate door type! frame! steel, core, material thickness, reinforcements! anchorages! exposed fasteners, hardware locations, openings (glazed! paneled or louvered) and hardware arrangement.
Include schedule identifying each unit with door marks or numbers referencing schedules and drawings.
Samples: Submit selection and verification samples for finishes, colors! and textures. Coordinate with Division 9 Painting Section for paint finishes.
Section 3A - 2