X hits on this document

709 views

0 shares

0 downloads

0 comments

199 / 324

08300

details, and special conditions.

  • C.

    Provide infonnation on components, application, hardware and accessories.

  • D.

    Closeout Submittals:

    • 1.

      Operation and maintenance data.

    • 1.5

      QUALITY ASSURANCE

A.

Manufacturer Qualifications: Manufacturer shall provide a door system capable of withstanding positive and negative design loads as required by local building code.

R

Installer Qualifications: Installer shall be authorized and qualified to install overhead door systems on the type and scope of project specified.

1.6

PERFORMANCE REQUIREMENTS

A.

Design doors to withstand positive and negative wind loads as calculated in accordance with applicable building code.

1.

Design Wind Load:

)b/sf.

2.

Test Wind Load: 1.5 times design wind load.

1.7

DELIVERY, STORAGE, AND HANDLING

A.

Store products in manufacturer's unopened packaging until ready for installation.

R

Store and dispose of all materials in accordance with federal, state and local laws.

    • 1.8

      PROJECT CONDITIONS

      • A.

        Maintain environmental conditions (temperature, humidity and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

    • 1.9

      WARRANTY

      • A.

        Provide an original of the manufacturer's limited wan'anty against manufacturing defects and product workmanship.

1.

Rolling Steel Door Warranty: 5 Years.

PART 2 PRODUCTS

    • 2.1

      MANUFACTURERS

      • A.

        Acceptable Manufacturer: C.H.L Overhead Doors, which is located at: 1485

08300-2

Document info
Document views709
Page views709
Page last viewedSun Dec 04 02:10:03 UTC 2016
Pages324
Paragraphs11037
Words86316

Comments