X hits on this document

954 views

0 shares

0 downloads

0 comments

204 / 324

SECTION 08 54 13

ALL ULTREX® SINGLE HUNG WINDOW

PART 1 GENERAL

    • 1.1

      SECTION INCLUDES

      • A.

        AB UltreX® single hung window complete with hardware, glazing, weather strip, insect half screen, grilles-between-the glass, jamb extension, sheet rock return, j-channel, and standard or specified anchors, trim and attachments.

1.2 RELATED SECTIONS

Section 01

33 23-Submittal Procedures: Shop Drawings, Product Data, and Samples.

Section 01

62 OO-Product Options

Section 01

65 OO-Product Delivery

Section 01

66 OO-Storage and Handling requirements

Section 01

71 OO-Examination and Preparation

Section 01

73 DO-Execution

Section 01

74 OO-Cleaning and Waste Management

Section 01

76 OO-Protecting Installed Construction

Section 06

22 OO-MiBwork: Wood trim other than furnished by window manufacturer

Section 07

92 OO-Joint Sealants: SiB sealant and perimeter caulking

Section 09

90 OO-Paints and Coatings: Paint or stain other than factory applied finish

1.3 REFERENCES

J.

K.

E.

A.

B.

C.

D.

I.

F.

G.

H.

  • A.

    American Society for Testing and Materials (ASTM):

    • 1.

      E 283: Standard Test Method for Rate of Air Leakage Through Exterior Windows, Curtain WaBs, and Doors.

    • 2.

      E 330: Standard Test Method for Structural Performance of Exterior Windows, Curtains Walls, and Doors by Uniform Static Air Pressure Difference.

    • 3.

      E 547: Standard Test lVlethod for Water Penetration of Exterior Windows, Curtain WaBs, and Doors by Cyclic Static Air Pressure Differential.

    • 4.

      E 774: Specification for Sealed Insulated Glass Units.

    • 5.

      C 1036: Standard Specification for Flat Glass.

  • S.

    Sealed Insulating Glass Manufactures Association 1Insulating Glass Certification Council (SIGMA IIGCC).

C.

American Architectural Manufacturers Association I Window and Door Manufacturers Association (MMA 1WDMA):

1.

2.

ANSI/MMAlNWWDA 101/I.S.2-97: Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors. 101/1.S. 2/NAFS-02: Voluntary Performance SpeCification for Windows, Skylights and Glass Doorsl

D.

Window and Door Manufacturers Association (WDMA): Hallmark Certification Program.

  • E.

    American Architectural Manufacturers Association (MMA): 613: Voluntary Performance Requirements and Test Procedures for Organic Coatings on Plastic Profiles.

  • F.

    National Fenestration Rating Council (NFRC): 101: Procedure for Determining Fenestration ProductThermal Properties.

1.4 SYSTEM DESCRIPTION

085413

1 All Ultrex® Single Hung Window - 2009

Document info
Document views954
Page views954
Page last viewedSun Dec 11 08:10:48 UTC 2016
Pages324
Paragraphs11037
Words86316

Comments