X hits on this document

939 views

0 shares

0 downloads

0 comments

206 / 324

PART 2 PRODUCTS

    • 2.1

      MANUFACTURED UNITS

      • A.

        Description: All Ultrex® Single Hung (and related stationary or picture units) as manufactured by Integrity Windows and Doors, Fargo, North Dakota.

    • 2.2

      FRAME DESCRIPTION

      • A.

        Interior: Pultruded reinforced fiberglass (Ultrex®), 0.065 - 0.070 inch (2 mm) thick.

      • B.

        Frame width: 33/32 inches (79 mm). Jamb depth: 2 inches (51 mm).

    • 2.3

      SASH DESCRIPTION

A.

Pultruded reinforced fiberglass (Ultrex®), 0.065

0.070 inch (2 mm) thick.

B.

Composite sash thickness: 15/16" inches (24 mm).

    • 2.4

      GLAZING

      • A.

        Select quality complying with ASTM C 1036. Insulating glass SIGMAIIGCC certified to performance level CBA when tested in accordance with ASTM E 774.

B.

Glazing method: 3/4 inch (19 mm) Insulated glass.

C.

Glass type: Low E 1\ - Argon gas [Low t::3 366™

  • -

    Argon gas].

D.

Glazing seal: Silicone bedding at exterior and interior.

2.5 FINISH

A.

Factory baked on acrylic urethane.

B.

Color: Stone White exterior with Stone White interior; Pebble Gray exterior with Stone White interior; Bronze exterior with Stone White interior; Evergreen exterior with Stone White interior; Cashmere exterior with Stone White interior; Ebony exterior with Stone White interior.

2.6 HARDWARE

A.

Balance System: Coil spring block and tackle with nylon cord and glass filled nylon shoe and steel locking shoe.

B.

Jamb Track: Pultrusion.

2.7 WEATHER STRIP

Color:

White.

  • A.

    Sill weather strip is foam filled vinyl bulb. The bottom sash is sealed to the jambs using rigid vinyl with flexible seals. The top stationary sash seal is foam tape. The checkrails are sealed using rigid vinyl with flexible seals.

    • 2.8

      JAMB EXTENSION

  • C.

    Lock: High

    • 1.

      Finish:

pressure zinc die-cast cam lock and keeper. Phosphate coated and electrostatically painted.

A.

Standard: 2". Furnish jamb extension: 4-9/16" (116 mm); 6-9/16 (167 mm); factory installed.

085413 - 3 All Ultrex® Single Hung Window - 2009

Document info
Document views939
Page views939
Page last viewedSun Dec 11 01:12:48 UTC 2016
Pages324
Paragraphs11037
Words86316

Comments