X hits on this document

822 views

0 shares

0 downloads

0 comments

207 / 324

    • 2.9

      INSECT HALF SCREEN

      • A.

        Factory installed half screen. Screen mesh, 18 by 16: Charcoal fiberglass.

      • B.

        Aluminum frame finish: Stone White; Pebble Gray; Bronze; Evergreen; Cashmere; Ebony.

    • 2.10

      GRILLES-BETWEEN-THE-GLASS (GBG)

A.

Manufactured from aluminum in an 11116" (17mm) wide contoured profile placed between the two panes of glass.

Available in rectangular and prairie lite cut patterns. Prairie lite pattern picture. Size limitations may apply to prairie lite cut availability.

six lite for single hung and nine lite for

Colors: Stone White exterior with Stone White interior; Pebble Gray exterior with Stone White interior; Bronze exterior with Stone White interior; Evergreen exterior with Stone White interior; Cashmere exterior with Stone White interior; Ebony exterior with Stone White interior.

    • 2.11

      ACCESSORIES AND TRIM

      • A.

        Installation Accessories:

        • 1.

          Factory installed vinyl folding nailing fin at head, sill and side jambs.

    • 2.

      Installation brackets: Brackets for 4-9116 inch (116 mm); 6-9116 inch (167 mm) jambs.

        • 3.

          Sheet rock return.

    • 4.

      J-channel.

        • 5.

          Mullion kit: Standard mullion kit for field assembly of related units available in horizontal, vertical and 2-wide and/or 2-high configurations. Kit includes: Instructions, interior and exterior mull covers, mull plugs and brackets.

PART 3 EXECUTION

    • 3.1

      EXAMINATION

      • A.

        Verification of Conditions: Before Installation, verify openings are plumb, square, and of proper dimension as required in Section 01 71 00. Report frame defects or unsuitable conditions to the General Contractor before proceeding.

    • B.

      Acceptance of Conditions: Beginning of installation confirms acceptance of existing conditions.

      • 3.2

        INSTALLATION

        • A.

          Comply with Section 01 7300.

        • B.

          Assemble and install window unit according to manufacturer's instructions and reviewed shop drawings.

        • C.

          Install sealant and related backing materials at perimeter of unit or assembly in accordance with Section 07 92 00

Joint Sealants. Do not use expansive foam sealant.

  • D.

    Install accessory items as required.

  • E.

    Use finish nails to apply wood trim and mouldings.

    • 3.3

      CLEANING

      • A.

        Remove visible labels and adhesive residue according to manufacturer's instructions.

      • B.

        Leave windows and glass in a clean condition. Final cleaning as required in Section 01 7400.

    • 3.4

      PROTECTING INSTALLED CONSTRUCTION

      • A.

        Comply with Section 01 7600. 08 54 13 - 4 All Ultrex® Single Hung Window 2009

Document info
Document views822
Page views822
Page last viewedWed Dec 07 22:29:09 UTC 2016
Pages324
Paragraphs11037
Words86316

Comments