X hits on this document

707 views

0 shares

0 downloads

0 comments

210 / 324

Section 08710

Comply with requirements of door and doorframe labels. Comply with NFPA No. 80 and local codes that are used in the area of the project.

1.04

DELIVERY, STORAGE AND HANDLING

A.

Deliver hardware to the jobsite only after proper provision for storage has

been made. B. Properly package and clearly identify each item relative to schedule. C. The hardware supplier shall authorize his representative to

the hardware

be present when

all

finish

hardware

is

delivered

to

the jobsite and

shall

check in each

item

and tum

over to

the

General

Trades

Contractor for

storage

in a

secure place

under lock and

key.

1.05

WARRANTY

A.

Furnish 3 copies of the following written warranty to be included in the

Maintenance Manuals:

  • 1.

    Warranty against mechanical failure of door closures for a 10-year period.

  • 2.

    Warranty against failure of parts of all hardware except door closures for a

period of 1 year. Warranty shall include cylinder locks. Starting date for all warranty periods to be the date of acceptance of building by Owner.

Part 2 PRODUCTS

    • 2.01

      SCHEDULED HARDWARE

      • A.

        Requirements for design, grade, function, finish, size and other distinctive

qualities of each type of Builders Hardware is indicted in the Hardware Schedule at the end ofthis section, and in the drawings. Products are identified by using

manufacturers' hardware product numbers. B. Manufacturers Product Designation: One or more manufacturers are listed for

each hardware type required. The initial after the manufactures name indicates whose product designation is used in the Hardware Schedule for purposes of establishing minimum requirements. Provide the product designated or where more than one manufacturer is listed, the comparable product of one of the other manufacturers, which comply with requirements including those specified elsewhere in this section.

    • 2.02

      MATERIALS AND FABRICATION

      • A.

        Hand of Door: The drawings show the direction of slide, wing or hand or

each door leaf. Furnish each item of hardware for proper installation and operation of the door movement as shown. B. Base Metals: Product hardware units ofthe basic metal and forming method indicated using the manufacturers standard metal alloy composition, temper and hardness.

Section 08710 2

Document info
Document views707
Page views707
Page last viewedSun Dec 04 01:02:19 UTC 2016
Pages324
Paragraphs11037
Words86316

Comments