X hits on this document

738 views

0 shares

0 downloads

0 comments

232 / 324

Section 09310

    • c.

      On Gypsum Wallboard: ANSI Al 08.4 (Reference TCA Method W242, Organic Adhesive).

      • 3.05

        GROUTING

    • A.

      Follow grout manufacturers recommendations as to !,'Touting procedures and precautions.

    • B.

      Remove all grout haze, observing grout manufacturers recommendations as to use of acid and chemical cleaners.

    • C.

      Rinse tilework thoroughly with clean water before and after using chemical cleaners.

    • D.

      Polish surface of tilework with soft cloth.

      • 3.06

        CLEANING

    • A.

      Upon completion of all tile installation and grouting, the Contractor shall thoroughly clean and polish the exposed surface of all tile.

      • 3.07

        PROTECTION FROM CONSTRUCTION DIRT

    • A.

      Cover all tile floors with heavy-duty, non-staining construction paper, masked in place.

      • 3.08

        PROTECTION FROM TRAFFIC

  • A.

    Prohibit all foot and wheel traffic from using newly tiled floors for at least 3 days, preferable 7 days.

  • B.

    Place large, flat boards in walkways and wheelways for 7 days where use of newly tiled floor with cement type grout is unavoidable.

END OF SECTION

Section 09310 4

Document info
Document views738
Page views738
Page last viewedSun Dec 04 23:25:36 UTC 2016
Pages324
Paragraphs11037
Words86316

Comments