METAL TOILET PARTITIONS AND URINAL SCREENS
PART 1- GENERAL
SCOPE OF WORK
The Contractor shall provide all labor, materials, tools and equipment required to furnish and install metal toilet partitions, urinal screens and attachment hardware, as described in the section and as shown on the Contract Drawings.
Related Work: Blocking required for installation of the toilet partitions and screen in accordance with the provisions of Section 01001 of these specifications.
The Contractor shall provide descriptive submittals in accordance with the provisions of Section 01001 of these Specifications. Submittals include, but are not limited to, the following:
Shop drawings, including dimensioned partition layouts, door swings, partition elevations and anchorage and mounting details.
Catalog data describing partition model, finished, panel construction and other relevant data, catalog number and catalog cut for each item where applicable.
Color samples to show partition panel color.
Manufacturer's current recommended method of installation, showing all required blocking and bracing.
The Contractor shall use all means necessary to protect toilet partitions and urinal screens before, during and after installation, and to protect the installed work and materials of all other trades.
Replacements: In the event of damage, immediately make all repairs and replacements necessary to the approval of the Architect and at no additional cost to the Owner.
PART 2 - PRODUCTS
TOILET PARTITIONS AND URINAL SCREENS
Type and style:
All toilet partitions and minal screens shall be in the dimensions and arrangements indicated on the drawings.