X hits on this document

714 views

0 shares

0 downloads

0 comments

247 / 324

Section 10800

TOILET ACCESSORIES

1.01

SCOPE OF WORK

A.

The Contractor shall provide all labor, materials, tools and equipment required to furnish and install the toilet accessories as described in this section and as shown on the Contract Drawings. Related Work: Blocking required for installation of the toilet accessories.

B.

1.02

SECTION INCLUDES

A. B.

Toilet accessories with all attachment hardware. Grab bars.

1.03

SYSTEM DESCRIPTION

A.

Conform to applicable code for installing work in conformance with ANSI All7.l.

1.04

SUBMITTALS

Part 1

GENERAL

function and attachment methods.

A.

Product Data: Provide data on accessories describing size, finish, details of

PART 2

PRODUCTS

    • 2.01

      MATERIALS

      • A.

        Manufacturers:

        • a.

          American Specialties, Inc. (scheduled)

        • b.

          Bobrick

        • c.

          American Dryer (electric hand dryer)

      • B.

        Sheet Steel: ASTM A-366. Cold rolled, stretcher level, galvanized.

      • C.

        Stainless steel sheet: ASTM A-167, Type 304, min. 22ga.

      • D.

        Tubing: ASTM A-269, stainless steel, seamless, welded. Adhesive: As recommended by Manufacturer. Fasteners, screws and bolts: Hot dip galvanized steel, tamper proof.

2,f)2

FABRICATION

Fonn exposed surfaces from one sheet of stock, free ofjoints, where possible. Weld and grind smooth joints of fabricate components.

Section 10800

1

Document info
Document views714
Page views714
Page last viewedSun Dec 04 04:05:26 UTC 2016
Pages324
Paragraphs11037
Words86316

Comments