X hits on this document

701 views

0 shares

0 downloads

0 comments

250 / 324

Section 12303

COUNTERTOPS AND ACCESSORIES

PART 1 - GENERAL

    • 1.1

      DESCRIPTION

      • A.

        This section specifies casework countertops with integral accessories.

      • B.

        Integral accessories include:

        • 1.

          Sinks with traps and drains.

        • 3.

          Mechanical Service fixtures.

    • 4.

      Electrical Receptacles.

        • 5.

          Hot Plates (Range)

    • 1.2

      RELATED WORK

      • B.

        Division 15, PLUMBING SYSTEMS

      • C.

        Division 16, ELECTRICAL SYSTEMS

      • D.

        Equipment Reference Manual for Section 12303.

    • 1.3

      SUBMITTALS

      • A.

        Submit in accordance with Section 01340, SAMPLES AND SHOP DRAWINGS.

      • B.

        Shop Drawings

        • 1.

          Show dimensions of section and method of assembly. Show details of construction at 112 scale.

Samples:

        • 1.

          150 mm (6 inch) square samples each top.

        • 2.

          Front edge, back splash, end splash and core with surface material and booking.

    • 1.4

      APPLICABLE PUBLICATIONS

      • A.

        Publications listed below form a pal1 of this specification to the extent referenced. Publications are referenced in the text by the basic designation only.

      • B.

        American Hardboard Association (AHA): A135.4-95 ..............................Basic Hardboard

      • C.

        National Particle Association (NPA): A208.1-93 ..............................Wood Particleboard

      • D.

        American Society of Mechanical Engineers (ASME): A112.18.1M-03 ................Plumbing Fixture Fittings 1

Section 12303

Document info
Document views701
Page views701
Page last viewedSat Dec 03 18:08:04 UTC 2016
Pages324
Paragraphs11037
Words86316

Comments