X hits on this document

180 views

0 shares

0 downloads

0 comments

26 / 69

Outside Corners and Curbs At outside corners such as curbs, the reverse situation occurs from that of inside corners. The “V”-shaped cut goes at the top of the membrane strip and the notch or straight slice at the bottom, since the membrane is folding the opposite way.

In this case, cap the opening at the bottom of the strip which extends onto the field of the roof a minimum of 4"

Note: Completed field membrane shall be extended 2" above top edge of cant and solid attached to cant strip only.

Outside corner (or curb) detail, mineral surfaced torch applications – part A

Outside corner (or curb) detail, mineral surfaced torch applications – part B

Outside corner (or curb) detail, mineral surfaced torch applications – part C

24

Document info
Document views180
Page views180
Page last viewedFri Dec 09 14:09:01 UTC 2016
Pages69
Paragraphs1412
Words15077

Comments