X hits on this document

142 views

0 shares

0 downloads

0 comments

8 / 69

FlintBoard™ ISO

Features a closed-cell polyiso core laminated to heavy, black (non-asphaltic), fiber-reinforced felt facers

ASTM C1289, Type II

FlintBoard™ ISO-T

Features a tapered design to promote positive drainage

ASTM C1289, Type II

FlintBoard™ ISO Cold

Features a heavy duty facer designed specifically for single ply, COLD applied hybrid BUR and SBS modified bitumen roof systems

ASTM C1289, Type II

FlintBoard™ ISO-T Cold

Features a heavy duty facer and a tapered design to promote positive drainage

ASTM C1289, Type II

FlintBoard™ ISO Plus

Composite roof insulation with foam core laminated to 1/2" perlite with a fiber-reinforced felt facer

ASTM C1289, Type II or Type III

FlintBoard™ ISO-T Plus

Composite roof insulation with a tapered design to promote positive drainage

ASTM C1289, Type II or Type III

FlintBoard™ ISO WF

Composite roof insulation with foam core laminated to 1/2" high density wood fiberboard

ASTM C1289, Type IV

FlintBoard™ ISO-T WF

Composite roof insulation with a tapered design to promote positive drainage

ASTM C1289, Type IV

FlintBoard™ ISO DD

Composite roof insulation with foam core laminated to 1/4" DensDeck

ASTM C1289, Type VII

FlintBoard™ ISO F

Features a closed-cell polyiso core with tri-laminated foil facers on each side

ASTM C1289, Type I

FlintBoard™ ISO NB

Composite roof insulation with foam core laminated to 7/16" or 5/8" OSB, also available bonded to plywood

ASTM C1289, Type IV

FlintBoard™ CV

Cross-ventilating design specifically for use over sloped unventilated roof decks

ASTM C1289, Type II

FlintBoard™ EPS

Features lightweight, rigid EPSC molded, expanded polystyrene

ASTM C578

FlintBoard™ Pre-Cut Crickets

Pre-packaged in triangular sections only (not the entire cricket), each with a right angle to align with CertainTeed’s standard 4' x 4' tapered FlintBoard insulation panels

ASTM C1289, TypeII

Product Name

Roofing Insulation and Coverboards Description

Specifications

*Application Methods: MF = Mechanically Fastened / HA = Hot Asphalt / CA = Cold Asphalt / TA = Torch Applied / SA = Self-Adhering

FlintFast™ #12 Screws

Features sharp drill point and tapered wedge entry; corrosion protection and back-out resistance; available in lengths from 1-5/8" to 8"

FlintFast™ #14 Heavy Duty Screws

Heavy duty drill point fasteners with tapered wedge entry; low-profile head, deep threads; available in lengths from 1-1/2" to 12"

FlintFast™ #3" Galvalume Insulation Plates

Concave, reinforced circular design with low profile; designed for outer perimeter strength with recess for screw head

FlintFast™ SIPLD Screws

SIP panel fastener, light duty drill point for corrugated steel deck and wood applications

FlintFast™ TB-75 Termination Bar

.075" thick aluminum termination bar; comes with sealant edge

FlintFast™ TB-90 Termination Bar

.090" thick aluminum termination bar; no sealant edge

Product Name

Fasteners Description

6

Document info
Document views142
Page views142
Page last viewedSun Dec 04 12:54:18 UTC 2016
Pages69
Paragraphs1412
Words15077

Comments