X hits on this document

185 views

0 shares

0 downloads

0 comments

9 / 69

Product Name

Edge Metal Description

FlintEDGE™ Coping

The coping utilizes a metal chair that functions as both a gutter chair with its raised ribs and as an internal splice plate in the same color and finish as the coping cap. Standard 20-gauge galvanized steel cleat. For wall sizes 6" to 32". UL Classified to meet the ANSI/SPRI ES-1 Roof Edge Standard.

FlintEDGE™ Coping+

The coping utilizes a metal chair that functions as both a gutter chair with its raised ribs and as an internal splice plate in the same color and finish as the coping cap. A heavy 16-gauge cleat is available for high wind areas. For wall sizes 6" to 32". UL Classified to meet the ANSI/SPRI ES-1 Roof Edge Standard.

FlintEDGE™ Fascia ET

FlintEdge™ Fascia ET extruded aluminum retainer features a wide base flange to securely hold down BUR and modified bitumen roofing plies. UL Classified to meet the ANSI/SPRI ES-1 Roof Edge Standard.

FlintEDGE™ Fascia GG

FlintEdge™ Fascia GG grips the roofing plies without the need for exposed fasteners. Standard face sizes are 6.25", 7.75", 9.25" and 10.75". Custom sizes available upon request. UL Classified to meet the ANSI/SPRI ES-1 Roof Edge Standard.

FlintEDGE™ Fascia GS

FlintEdge™ Fascia GS is a simple formed gravel stop fascia continuous anchor clip with a concealed splice plate at the joints. Three clip styles to choose from. Standard sizes are from 2.5" to 12".

FlintEDGE™ Gutter

FlintEdge™ Gutter is custom sized to meet your special requirements. Designed with internal straps for smooth, clean lines and ease of installation. External hangers are optional.

FlintEDGE™ Downspout

FlintEdge™ Downspouts have a factory offset for concealed joints. Factory fabricated starter tubes are available to help channel water into the downspout. Standard or custom elbows help complete the professional appearance.

FlintEDGE™ Conductor Heads

FlintEdge™ Conductor Heads are factory fabricated in the size and shape to meet your unique requirements. Blanks are cut using Conductor Heads computer-controlled equipment for precise, professional appearance.

FlintEDGE™ Scuppers

FlintEdge™ Scuppers are factory fabricated in the size and shape to meet your unique requirements. Blanks are cut using computercontrolled equipment for precise, professional appearance.

FlintEDGE™ Drain

FlintEdge™ Drain Through Gravel Stop is custom sized to meet your special requirements. Designed with internal straps for smooth, Through Gravel Stop clean lines and ease of installation. External hangers are optional.

FlintEDGE™ Expansion Joint

FlintEdge™ Expansion Joint is a multi-part assembly design to facilitate the horizontal and lateral movement of curbs or roof sections. Roof to Roof – CertainTeed’s roof-to-roof expansion joint features a snap-on cap for ease of installation and improved aesthetic appearance. Roof to Wall – CertainTeed’s roof-to-wall expansion joint features a metal cap for ease of installation and improved aesthetic appearance.

FlintEdge™ Concealed Mount Reglet – The surface-mounted wall reglet permits fastener concealment under the continuous snap-on flashing skirt. An attractive and weatherproof counter flashing design.

FlintEdge™ In-Wall Drive-Lock Reglet – Two-piece counter flashing system with surface-mounted reglet/ receiver punched for fastening 12" o.c. Snap-on metal skirt flashing can be removed for re-roofing or maintenance.

FlintEDGE™ Reglet and Flashing

FlintEdge™ Surface Mount Reglet – Standard one-piece design. Sections easily overlap for continuous counter flashing of wall terminated roofing. Fast installation. Pre-punched fastener holes at 12" o.c. Custom sizes available upon request.

FlintEdge™ Snap-on Face Reglet – Continuous wall retainer bar secures roofing to the wall or blocking with fastener holes 12" o.c. Snap-on metal fascia cover conceals fasteners. Attractive clean lines with your choice of 24 standard Kynar 500® colors.

Product Name

Primers Description

Specifications

FlintPrime™

A general purpose, penetration asphalt primer used for the preparation of all types of surfaces prior to application of hot or cold asphalt coatings.

FlintPrime™ SA

A water-based polymer modified primer for use with self-adhering modified bitumen roofing membrane systems such as Flintlastic® SA. Designed to enhance adhesion of self-adhering modified bitumen membranes.

Meets or exceeds ASTM D41, Miami-Dade Approved

*Application Methods: MF = Mechanically Fastened / HA = Hot Asphalt / CA = Cold Asphalt / TA = Torch Applied / SA = Self-Adhering

7

Document info
Document views185
Page views185
Page last viewedSat Dec 10 12:19:34 UTC 2016
Pages69
Paragraphs1412
Words15077

Comments