X hits on this document

484 views

0 shares

0 downloads

0 comments

107 / 201

9 Non-accessed EAN and Customer Deletion

X1/Z1 MODE X2/Z2 MODE

You can delete EANs and customers that had not been accessed for a certain period. You can program a period in the PGM2 mode. As for customer, you can also delete customers with regardless to a non-accessed period. Follow the procedure shown below.

Non-accessed EAN deletion

  • 1.

    Move the mode key to X1/Z1 position.

  • 2.

    Select “7 EAN DELETE”.

  • 3.

    Select “1 READING” to take a report, or “2 DELETE” to delete non-accessed EANs.

  • 4.

    When you select “2 DELETE”, select you want to delete all the non-accessed EANs (1 ALL

DELETE) or delete the non-accessed EANs individually (2 IND.DELETE).

NOTE

It is recommended to take a report first before executing deleting operation.

Non-accessed customer deletion

  • 1.

    Move the mode key to X2/Z2 position.

  • 2.

    Select “6 NO ACCESS CUSTOM”.

  • 3.

    Select “1 READING” to take a report, or “2 DELETE” to delete non-accessed customers.

  • 4.

    When you select “2 DELETE”, select you want to delete all the non-accessed customers (1 ALL

DELETE) or delete the non-accessed customers individually (2 IND.DELETE).

NOTE

It is recommended to take a report first before executing deleting operation.

Customer deletion

  • 1.

    Move the mode key to X2/Z2 position.

  • 2.

    Select “7 CUSTOM DELETE”.

  • 3.

    Specify the range (start/end customer codes) you want to delete.

105

Document info
Document views484
Page views485
Page last viewedMon Dec 05 03:34:06 UTC 2016
Pages201
Paragraphs7587
Words43074

Comments