X hits on this document

418 views

0 shares

0 downloads

0 comments

118 / 201

116

Department (continued)

  • TAXABLE 1 through 6 (Use the selective entry)

Tax status YES: Taxable NO : Non-taxable

NOTE

  • The tax system of your POS terminal has been factory-set to automatic VAT1 - 6. If you desire to select any of automatic tax 1 - 6, manual VAT1 - 6, manual VAT1, manual tax 1 - 6, and the combination of the automatic VAT 1 - 3 and the automatic tax 4 - 6, contact your authorized SHARP dealer.

  • When the combination of the automatic VAT1 - 3 and automatic tax 4 - 6 system is selected, one of the taxable 1 - 3 can be selected in combination with taxable 4 - 6.

  • HALO (Use the numeric entry)

    • You can set an upper limit amount (HALO) for each department. The limit is effective for the REG- mode operations and can be overridden in the MGR mode.

    • AB is the same as A x 10B A: Significant digit for HALO (1 through 9) B: Number of zeros to follow the significant digit for HALO (0 through 8)

  • COMMIS. No. (Use the numeric entry) Commission group number (1 through 9) If the number “0” is entered, no commission group number will be assigned to a department. You can assign each department to a commission group.

  • OUTPUT KP No. 1 and No. 2 (Use the numeric entry) ID number of the network remote printer 1 or 2 (1 through 9) If the number “0” is entered, no remote printer will operate.

  • RECEIPT PRINT (Use the selective entry)

YES: NO:

Prints the department sales information on the receipt. Prints nothing on the receipt.

  • PRNT ON CLK (Use the selective entry)

YES: NO:

Prints the department sales information on the clerk report. Prints nothing on the clerk report.

  • VMP No. (Use the numeric entry) VMP file number for EAN (1 through 3). If the number “0” is entered, no VMP file number is assigned.

Document info
Document views418
Page views419
Page last viewedThu Nov 24 01:21:19 UTC 2016
Pages201
Paragraphs7587
Words43074

Comments