X hits on this document

463 views

0 shares

0 downloads

0 comments

164 / 201

162

Remote printer (KP#1 through KP#9)

Procedure

Program each item as follows:

  • TERMINAL# (Use the numeric entry) Terminal number (1 through 254 : Enter “0” for local device.)

  • CHANNEL# (Use the numeric entry) Channel number (1 through 7) When you program as “0”, no RS-232 channel is assigned.

  • PRINTER (Use the selective entry)

The screen continues.

Select the printer to be us BUILT-IN (Built-in printer) EPSON TM-T88/85

ed.

EPSON TM-U210 EPSON TM-T88(2)

  • AUTO CUTTER (Use the selective entry)

Auto cutter function

YES: NO:

Enables auto cutter function. Disables auto cutter function.

  • PAPER SHEET (Use the selective entry) Select a paper type. TWO: Uses two or more sheets. ONE: Uses one sheet.

  • PRINT TYPE (Use the selective entry) Select the type of receipt print formats. ADDITION: Addition

S/D: ADD+S: D ADD.:

Single/Double Addition + Single Double addition

D ADD+S:

Double addition + Single

  • SECOND KP (Use the numeric entry)

You can assign a second remote printer to which data should be output when the first remote printer encounters an error during transmission of the data. Second remote printer number (0 to 9)

  • NAME (Use the character entry) Description for the remote printer (max. 12 characters)

  • INITIAL FEED# (Use the numeric entry) Initial line feed for a remote printer (0 to 64)

Document info
Document views463
Page views464
Page last viewedSun Dec 04 06:53:48 UTC 2016
Pages201
Paragraphs7587
Words43074

Comments