X hits on this document

589 views

0 shares

0 downloads

0 comments

165 / 201

BCR (SCANNER)

Procedure

Program each item as follows:

  • CHANNEL# (Use the selective entry) Channel number (0 through 7) When you program as “0”, no RS-232C channel is assigned.

  • BAUD RATE (Use the selective entry) Transmission speed (baud rate) 19200 bps/9600 bps/4800 bps

  • DATA BITS (Use the selective entry) Data bit: 7 bits/8 bits

  • PARITY (Use the selective entry) Parity bit: NON/ODD/EVEN

  • STOP BIT (Use the selective entry) Stop bit: 1 bit/2 bits

Procedure

Program each item as follows:

Select a pertinent device from the “DEVICE CONFIG” window.

• CHANNEL# (Use the numeric entry) Channel number (1 through 7) When you program as “0”, no RS-232 channel is assigned.

Scale/On-line

163

Document info
Document views589
Page views590
Page last viewedSun Dec 11 05:03:53 UTC 2016
Pages201
Paragraphs7587
Words43074

Comments