X hits on this document

531 views

0 shares

0 downloads

0 comments

169 / 201

On-line Configuration Programming

Use the following procedure to select the on-line configuration programming. Please consult your dealer for more details.

Procedure

  • 1.

    In the SETTING window, select “18 ONLINE CONFIG”.

    • The ONLINE CONFIG window will appear.

  • 2.

    Program each item as follows:

    • TERMINAL No. (Use the numeric entry) Terminal number (0 to 999999).

    • CI SIGNAL (Use the selective entry) Sensing of the CI signal NON

SENSING

  • LINE FORM (Use the selective entry)

Programming of the modem control

38400 bps

19200 bps

9600 bps

4800 bps

2400 bps

1200 bps

600 bps

300 bps

  • BAUD RATE (Use the selective entry)

Transmission data rate

FULL: HALF:

Full duplex system Half duplex system

  • START CODE (Use the numeric entry) Start code (0 to 127)

  • END CODE (Use the numeric entry) End code (0 to 127)

  • TIME OUT (Use the numeric entry) Programming of the time-out time (1 to 255 sec.)

167

Document info
Document views531
Page views532
Page last viewedThu Dec 08 00:14:20 UTC 2016
Pages201
Paragraphs7587
Words43074

Comments