X hits on this document

1017 views

0 shares

0 downloads

0 comments

187 / 201

Code entry

No add-on code

2-digit add-on code

5-digit add-on code

UPC-A

12

14

17

UPC-A w/leading zero

13

15

18

UPC-A w/o check digit

11

UPC-E

6

EAN-8

8

EAN-13

13

15

18

Add-on code

UPC-A and EAN-13 may be followed by a two digits number or a five digits number as add-on code, excepting UPC-A without a check digit plus two or five digits add-on code. Therefore, the total number of digits enterable for sales entries are as shown below:

NOTE

Your register automatically judges the add-on code in an EAN code entered from the total number of digits and the flag.

EAN file

Your POS terminal has an EAN main file and can provide a Dynamic EAN (D-EAN) file.

EAN main file In general use, all EAN items are managed in the EAN main file. The programming data and sales information is recorded in the EAN main file.

Dynamic EAN file If an dynamic EAN file is allocated, the items entered by EAN learning function (refer to “EAN learning function” section.) are saved in this file temporarily. (If not generated, they are directly saved in the EAN main file.) The data saved temporarily can be transferred to the EAN main file when necessary by executing D-EAN LOAD in the PGM2 mode.

If you want to use the dynamic EAN file, consult your authorized SHARP dealer.

185

Document info
Document views1017
Page views1018
Page last viewedMon Jan 23 15:11:06 UTC 2017
Pages201
Paragraphs7587
Words43074

Comments