X hits on this document

580 views

0 shares

0 downloads

0 comments

188 / 201

186

13 EURO Migration Function

Basically your POS terminal can be automatically modified to correspond to the introduction of EURO by executing the operation “EURO STATUS” in X2/Z2 mode. However, there are several options you must set depending on your need. So, please carefully conduct necessary settings. For details, contact your authorized SHARP dealer.

EURO status: You can select status from following 4 types ((A), (B), (C), or (D)). And the selectable type is decided as follows for each status. Type (A) is the base status (initial status).

From type (A) From type (B)

selectable selectable

Type (B), (C), or (D) Type (C), (D)

From type (C)

selectable

Type (D)

Items

Type (B)

Type (C)

General Z1 report General Z2 report GT1/GT2/GT3 memory Exchange1 amount printing for total and change Exchange1 amount printing for total validation print Exchange1 calculation method Domestic currency symbol Domestic TAB Conversion of preset prices of Dept./PLU/EAN*

ISSUE ISSUE YES YES

ISSUE ISSUE CLEAR YES YES MULTI [EURO] 2 YES

DIVISION

Exchange1 currency descriptor

[EURO]

The current domestic currency symbol

Type (D)

ISSUE ISSUE CLEAR NO NO MULTI [EURO] 2 YES

Exchanger1 TAB

2

The current domestic TAB

The marked items “—” is remaining the current data. *: The preset rate of the , key is applied as the conversion rate, and the calculation method is set to

“division”. When the conversion has been made, the message “PRICE CONVERTED” is printed on the report.

Document info
Document views580
Page views581
Page last viewedSat Dec 10 14:52:54 UTC 2016
Pages201
Paragraphs7587
Words43074

Comments