X hits on this document

505 views

0 shares

0 downloads

0 comments

191 / 201

  • Avoid the following environments: Dusty and humid places Direct sunlight Iron powder (A permanent magnet and electromagnet are used in this machine.)

  • Use the print head release lever only when necessary.

  • Never pull the paper when it is in contact with the print head. First release the head with the print head release lever, and then remove the paper.

  • Never touch the surface of the print head.

  • Never touch around the print head and the motor during printing or before they have had sufficient time to cool.

Cautions in handling the recording paper (thermal paper)

  • Use only the paper specified by SHARP.

  • Do not unpack the thermal paper until you are ready to use it.

  • Avoid heat. The paper will color at around 70°C.

  • Avoid dusty and humid places for storage. Avoid direct sunlight.

  • The printed text on the paper can discolor under the following conditions: Exposure to high humidity and temperature Exposure to the direct sunlight Contact with glue, thinner or a freshly copied blueprint. Heat caused by friction from scratching or other such means. Contact with a rubber eraser or adhesive tape.

  • Be very careful when handling the thermal paper. If you want to keep a permanent record, copy the printed text with a photocopier.

189

Document info
Document views505
Page views506
Page last viewedTue Dec 06 18:13:13 UTC 2016
Pages201
Paragraphs7587
Words43074

Comments