X hits on this document

1003 views

0 shares

0 downloads

0 comments

196 / 201

194

Cleaning the Print Head

When the printed text is getting dark or faint, paper dust may be stuck to the print head. Clean the print head as follows:

1. Turn the mode switch to the “ 2. Remove the printer cover. 3. Remove the paper(s). 4. While pushing the tab, pull up the paper guide. 5. Pull the print head release lever all the way forward ” position.

(after it stops at one position, continue pulling forward until it stops again and cannot be pulled forward any further).

Print head

  • 6.

    Clean the print head with a soft rag moist with ethyl alcohol or isopropyl alcohol.

  • 7.

    Return the print head release lever to its original position immediately after cleaning.

  • 8.

    Return the paper guide to its original position. Make sure the metal part is surely hooked to the tab.

  • 9.

    Reset the paper roll(s) correctly by following the step in “Installing the paper roll”.

  • 10.

    Replace the printer cover.

Precautions: Never touch the print head with a tool or anything hard as it may damage the head.

Document info
Document views1003
Page views1004
Page last viewedMon Jan 23 05:06:09 UTC 2017
Pages201
Paragraphs7587
Words43074

Comments