A maximum of 10 tied PLUs of the Combo PLU can be modified (added or deleted) temporarily by using W
and With: w
keys. To add a PLU to the combo PLU/EAN.
To delete a linked PLU from the combo PLU/EAN.
To enter the next PLU code to be added
PLU code to be added
Direct PLU (To be added)
Tied PLU code to be deleted
Scan Combo EAN code
Combo EAN code
Combo PLU code
Direct PLU (Combo PLU)
Direct PLU (To be deleted)
To enter the next PLU code to be deleted
The “with” and “without” operation is allowed a total of 20 times.
W 17 P w 16 P 12 P
PLU level shift (for direct PLUs)
This shift can double or triple the number of direct PLUs on your POS terminal without adding additional direct PLU keys. You can use direct PLUs in three levels by utilizing the PLU level shift number key, ä or the PLU level shift keys ⁄ thru ‹. Level key shifts the PLU level from the other two to the required level. (The normal level is the level 1.) You must program your machine in the PGM mode to select one of the two PLU level shift modes — automatic return mode* and lock shift mode** — and decide whether to allow PLU level shift in both the REG and MGR modes or in the MGR mode alone.
The automatic return mode automatically shifts the PLU level back to level 1 after pressing a direct PLU
key or finalizing each transaction. ** The lock shift mode holds the current PLU level until depression of a PLU level shift key.