X hits on this document

271 views

0 shares

0 downloads

0 comments

14 / 76

Chapter 3 Special Inspections Classification

SICC-303 STATEMENT OF SPECIAL INSPECTIONS (SSI)

SICC-303.1 Content. The SSI shall identify the scope of the special inspections services applicable to the project and shall include the names of the RDPs, including the SIER and GER, and the inspection and testing agencies providing those services. The SIER and the inspection and testing agencies are subject to CCBSD approval.

SICC-303.2 Submittal, review and approval. The SSI shall be incorporated into the construction documents (see SICC-301.1 and NCSBC-1704.1.1) and shall be submitted by the permit applicant to the CCBSD. The CCBSD shall review and approve the SSI prior to scheduling the preconstruction meeting (see Chapter 4).

SICC-303.3 SSI Form. A blank copy of a three page SSI Form is provided in Appendix A. The forms are to be prepared by the Registered Design Professional in Responsible Charge, and the Engineers of Record for the project.

Page two of the form, identifies the types of work needing special inspection services as well as the Special Inspections Engineer of Record and Testing Labs responsible for the services. Normally these services are provided by one engineering firm or Registered Design Professional however the form can be used by multiple inspection agents.

Page three of the form is the Quality Assurance plan and provides the seismic and wind systems and components requiring special inspections prepared by the Structural Engineer of Record. Page three also provides a list of contractors responsible for the construction or fabrication of a systems and components identified in the Quality Assurance Plan. Copies of these forms as well as Daily Field Report and Weekly Engineers Summary Report can be found in Appendix A.

Page 14

Document info
Document views271
Page views271
Page last viewedSun Jan 22 12:58:25 UTC 2017
Pages76
Paragraphs2201
Words27762

Comments