X hits on this document

29 views

0 shares

0 downloads

0 comments

6 / 10

Resist GTI Comp. B

Resist GTI Comp. B

Kawalan pendedahan pekerjaan

: Tiada ventilasi khas diperlukan. Pengalihudaraan am yang baik hendaklah mencukupi untuk mengawal bahan cemar bawaan udara yang terdedah kepada pekerja. Jika produk ini mengandungi bahan/ramuan dengan had pendedahan, guna proses tertutup, ventilasi ekzos setempat, atau kawalan kejuruteraan lain untuk memastikan pekerja di bawah sebarang had atau kanun yang disyorkan.

Perlindungan respiratori

: Guna alat penulen udara atau alat pernafasan bekal udara yang muat dengan baik yang mendapat kelulusan piawai jika risiko penilaian menunjukkan ianya perlu. Pemilihan alat pernafasan mesti berdasarkan tahap pendedahan diketahui atau dijangka, bahaya produk dan had pekerjaan selamat alat pernafasan yang dipilih itu.

Perlindungan tangan

: Sarung tangan kedap penentang bahan kimia, yang mematuhi piawaian yang diluluskan hendaklah dipakai pada setiap masa apabila mengendalikan produk kimia jika penilaian risiko menunjukkan ini adalah perlu.

Perlindungan mata

: Kacamata keselamatan yang mematuhi kelulusan piawai perlu digunakan apabila risiko penilaian menunjukkan ianya perlu untuk mengelakkan pendedahan kepada percikan cecair, kabus atau debu.

Perlindungan kulit

: Peralatan perlindungan peribadi untuk badan perlu dipilih berdasarkan tugas yang dilakukan dan melibatkan risiko dan perlulah diluluskan oleh pakar sebelum mengendali produk ini.

9.

Exposure controls/personal protection

Occupational exposure controls

: No special ventilation requirements. Good general ventilation should be sufficient to control worker exposure to airborne contaminants. If this product contains ingredients with exposure limits, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure below any recommended or statutory limits.

Respiratory protection

: Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.

Hand protection

: Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.

Eye protection

: Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists or dusts.

Skin protection

: Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

Exposure limit values

Ingredient name mica

Occupational exposure limits

DOSH USECHH (Malaysia, 4/2000). TWA: 3 mg/m³ 8 hour(s). Form: respirable fraction

zinc oxide

DOSH USECHH (Malaysia, 4/2000). TWA: 10 mg/m³ 8 hour(s). Form: dust TWA: 5 mg/m³ 8 hour(s). Form: fume

chromium (iii) oxide

DOSH USECHH (Malaysia, 4/2000). Notes: as Cr TWA: 0,5 mg/m³, (as Cr) 8 hour(s).

Safety phrases

Exposure controls

: S7/8- Keep container tightly closed and dry. S61- Avoid release to the environment. Refer to special instructions/safety data sheet.

10.

Kestabilan dan kereaktifan

Stability

: The product is stable.

Hazardous decomposition products

: Decomposition products may include the following materials: metal oxide/oxides

Kestabilan

: Produk ini stabil.

Produk pereputan berbahaya

: Produk penguraian mungkin termasuk bahan berikut: oksida logam

10.

Stability and reactivity

Tarikh keluaran/Date of issue : 31.03.2009.

6/10

Document info
Document views29
Page views30
Page last viewedMon Dec 05 16:59:59 UTC 2016
Pages10
Paragraphs456
Words4095

Comments