STEEL-LINE ROLLER DOOR ACCESSORIES
ROLLGUARD SECURITY PACKAGE Rollguard protected doors operate within special side tracks positioned to both sides of the garage opening. These help resist forced entry where a thief may attempt to lever or push the door out of its tracks.
REMOVABLE CENTRE MULLIONS Allows two or more Steel-line doors to be positioned in garage openings wider than 16’0” (5100mm), gives maximum opening width with mullions removed. For
doors up to 3760mm wide x 3000mm high.
INFILL PANELS For neat finishing touch to installations infill panels can be supplied to match the door.
HAND CHAIN KIT For doors that require manual operation when higher than can be operated by hand.
A U T O M AT I O N
AutoRolla ATA & Steel-line Uni-Lift Operator
Remote control operation of your door is effortless with the AutoRolla ATA operator (shown top) and the Steel-line Uni-Lift operator. The operators can be fitted at a later date but why wait!
BEAM BREAK Used as an additional non-contact safety feature. Two beam housings are situated inside the garage approximately 4" from the door back. The beam break will halt operation of the door while in motion if the invisible beam is interrupted.
RADIO DIGITAL KEYLESS ENTRY PAD Externally wall mounted, will accept a four digit code to operate door for opening/closing without the hand transmitter. A secure method of operation.
The AutoRolla-ATA and the Steel-line Uni-Lift roller door operator have motors proven for reliability and require the minimum of space.
EXTERNAL ELECTRIC KEYSWITCH For external wall mounted operation of automated Steel-line doors.
An auto reverse feature immediately stops the door if it comes into contact with any obstructions and an integral courtesy light illuminates the garage for safety and security. Rolling code technology ensures excellent security, generating a unique encrypted rolling code whenever the transmitter is operated. Supplied with two, four channel hand transmitters.
INTERNAL BELL PUSH SWITCH Used when an open/close switch is to be situated away from the control box.
The AutoRolla-ATA is an integrated unit with motor, control and light all in one compact unit, along with a range of advanced features. The Steel-line Uni-Lift operator control and light unit is independent from the motor allowing for convenient wall mounting.
EMERGENCY EXTERNAL UNLOCKING Used with an automated door when the garage has no other means of entry. Device will disengage the
power unit in the event of power failure.