X hits on this document

PDF document

Thank you for purchasing the GROM-USB2 adapter, which has been designed to - page 2 / 8

84 views

9 shares

0 downloads

0 comments

2 / 8

a) The GROM audio adapter set consists of the GROM-USB2 interface, one USB cable, and one vehicle-specific cable with optional accessories.

1. GROM USB interface

2.One USB cable

3. One Vehicle specific cable

b) The basic wiring diagram of the GROM Audio adapter is detailed in Figure 2:

BACK OF THE CAR RADIO

CD PORT

USB Stick / card

GROM Interface

Data cable

USB

MP3 player, iPod

Audio cable

USB cable

If your vehicle is equipped with an external factory CD changer, you must disconnect it in order to be able to install the GROM interface. You will lose the use of the external CD changer to gain the use of your USB device, iPod, or MP3 player. The built-in CD changer will remain operational. For a full version of the GROM compatibility guide, please visit http://gromaudio.com/grom application guide.pdf or contact GROM Audio at http://gromaudio.com/support.html.

Most installations will require removing the factory radio in order to plug in the vehicle- specific harness. For some vehicles, you will also have the option to connect the interface to the factory pre-run CD changer cable located in the trunk or glove box.

In most cases, there are no any special tools required in order to remove the stereo. For some stereos (e.g., VW, Audio), it is better to use car stereo removal tools. Please consult your local car audio shop or your vehicle’s dealership for instructions or assistance as necessary. If you are unsure how to install the interface properly, we

Document info
Document views84
Page views99
Page last viewedFri Dec 02 02:00:12 UTC 2016
Pages8
Paragraphs162
Words2438

Comments