X hits on this document

16 views

0 shares

0 downloads

0 comments

4 / 4

Accessories

To meet the recommendations of the standards of the National Fire Protection Association as published in their Pamphlet 20, current edition, certain accessories are required for all fire pump installations. They will vary, however, to fit the needs of each individual installation and the requirements of the local insurance authorities. Sterling provides a wide range of fire pump fittings which include: concentric discharge increaser, casing relief valve, eccentric suction reducer, increasing discharge tee, overflow cone, hose valve head, hose

valves, hose valve caps and chains, suction and discharge gauges, relief valve, automatic air release valve, flowmeter, and ball drip valve. No matter what the requirements, Sterling has a complete line of accessories available and can satisfy the requirements of each installation.

The charts reproduced below graphically illustrate the many accessories as well as the optional drives that are available with all Peerless fire pumps and packaged systems.

Peerless Horizontal Fire Pumps

Automatic Air Release Valve

Horizontal Steam Turbine

Compound Type Suction Gauge

FROM WATER SUPPLY

Gauge Protector (some high pressure applications)

Valve

Eccentric Suction Reducer

Discharge Gauge

TO WASTE

Casing Relief Valve

Building

Enclosed

TO

Cone

WASTE

Elbow

Relief Valve

(flanged)

Tee

Hose Valve Cap & Chain

Tee

TO WASTE (with back pressure)

TO WASTE

Elbow

OR SUPPLY

TO HOSE

Valve

Valve

Drain Valve

Flow Meter TEST LINE PIPE AND FITTINGS

Valve

Outside Hose Valve Head (number of hose valves is variable)

Nipple

Hose Valve

TO SYSTEM

Diesel Engine

Horizontal Electric Motor

Concentric Discharge Increaser (when discharge tee not used)

Check Valve

Tee

Valve

Peerless Vertical Fire Pumps

Automatic Air Release Valve (fittings and flange for engine or steam turbine drive)

Building

Hose Valve Cap & Chain

TO HOSE

Horizontal Steam Turbine

Diesel Engine

Water Level Testing Device Extend to Strainer (well installation only)

Column (threaded or flanged)

Vertical Electric Motor

Right Angle Gear

Discharge Gauge

DISCHARGE ASSEMBLY

Discharge Bowl (threaded or flanged)

Intermediate Bowls

Tee

Tee

Relief Valve

Enclosed Cone (flanged)

TO WASTE (with back pressure)

Elbow

Valve

Nipple Hose

Valve Outside Hose Valve Head

(number of hose valves is variable) Drain Valve

TO WASTE

TO WASTE

Tee

Valve

Flow Meter

Valve

TEST LINE PIPE AND FITTINGS

OR SUPPLY

TO SYSTEM

Bell Suction

Basket Strainer (sump installation)

FROM WATER SUPPLY

Concentric Discharge Increaser (when discharge tee not used)

Check Valve

Tee

Valve

Sterling Fluid Systems (USA), Inc.

P.O. Box 7026 • Indianapolis, IN 46207-7026 Phone: (317) 925-9661 • Fax: (317) 924-7388 Website: www.peerlesspump.com

A member of the Sterling Fluid Systems Group

Brochure B-1500

The content of this brochure is subject to change without notice.

© Copyright 2000 by Sterling Fluid Systems (USA), Inc.

Printed in U.S.A.

Document info
Document views16
Page views16
Page last viewedTue Dec 06 08:47:19 UTC 2016
Pages4
Paragraphs178
Words1240

Comments