AUTO SECURITY PRODUCTS
The ASP products shown on these pages, are only the pin kits.
Our Web Site
www.locksco.com has all of the ASP products that
we carry and can be purchased on our web site.
ASP has the parts and locks to fit most foreign made cars. They have a Quick Silver program that can get the part to you overnight, if necessary.
ASP also has the parts and locks to fit the 10-cut and 8-cut FORD products since 1984.
SERVICE NOTE: When using this kit for Nissan and Infiniti, if there is a #1 and #4 depth s must be filed and made longer. For all other combinations the A-13-101 kit will work with will be available soon(listed below) specifically for the Nissan and Infiniti applications.
ide by side, the throat cut of these tumblers no problems. New keying kit no. A-16-108
Chambers 7-11 in door locks deadlock
BMW 3-ser. 99-00
NOTE: This lock was originally designed to have a #4 depth in the code series. A #4 depth is listed in the code series, and #4 tumblers were included in early versions of these keying kits. However in actual usage few if any vehicles were actually produced using codes including a #4 depth. As such the #4 tumbler is no longer produced and must be eliminated from the kit.
Land Rover Range Rover Sterling
X170/NE64 X170/NE64 X170/NE64
Ign., Doors *Door,Trunk *Glove,Tank
Each lock has some chambers requiring the P-14-141/144 design tumblers and other chambers requiring P-14-161/164 design
tumblers. These series of tumblers are all 0.040 inch thickness. For 0.030 inch thickness tumblers of the same designs use kit no. A-14-107.