X hits on this document

PDF document

California Mechanical Code (Part 4, Title 24, California Code of Regulations) - page 48 / 49

139 views

0 shares

0 downloads

0 comments

48 / 49

Chapter 17

Standard Number

NFPA 54-2002/ANSI Z223.1 NFPA 58-2004 NFPA 69-2002 NFPA 70-2005 NFPA 85-2004 NFPA 96-2004

NFPA 211-2003

NFPA 255-2005 NFPA 262-2006 NFPA 654-2005

NFPA 853-2006 PPI TR-4, 2004

SAE J512-97

SMACNA, 1995 Addendum 1, 11/97

SMACNA 1884, 2003 UL 17, 1994 edition 3 UL 21, 1995 edition 9 UL 33, 2003 edition 7 UL 51, 2002 edition 9 UL 80, 2004 edition 11 UL 103, 2001 edition 10 UL 125-1997 edition 6 UL 127-1996 edition 7 UL 132, 1997 edition 6 UL 144, 1999 edition 7 UL 174, 2004 edition 11 UL 180-2003 edition 7 UL 181, 1996 edition 10 UL 181A, 1994 edition 3 UL 181B, 1995 edition 2 UL 197, 2003 edition 9 UL 207, 2001 edition 7

UL 252, 2003 edition 8 UL 268A, 1998 edition 3 UL 296, 2003 edition 10

278

2007 CALIFORNIA MECHANICAL CODE

Standard Title [UMC References]

National Fuel Gas Code [UMC 303.3(D), 516.2.1, 1309.7.5(D), 1311.4, 1311.4.1] Liquefied Petroleum Gas Code [UMC 516.2.1, 1309.5.4.3, 1309.5.9(D), 1313.0] Explosion Prevention Systems National Electrical Code [UMC 511.1.6, 512.2.5, 516.2.5, 516.2.7(D), 602.2(5), 1311.12.5(B)] Boiler and Combustion Systems Hazard Code [UMC 1002.0(9), 1020.0] Ventilation Control and Fire Protection of Commercial Cooking Operations

Chimneys, Fireplaces, Vents, and Solid Fuel Burning Appliances [UMC 517.7.1, 517.7.2, 517.7.3, 801.1, 801.2, 802.5.1.2, 802.5.1.3, 802.5.4]

Method of Test of Burning Characteristics of Building Materials [UMC 602.2, 605.0, 1201.4.1.3] Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces [UMC 602.2(5)]

Prevention of Fire and Dust Explosion from the Manufacturing, Processing, and Handling of Combustible Particulate Solids [UMC 506.4]

Installation of Stationary Fuel Cell Power Plants [UMC 1601.0]

Recommended Hydrostatic Strengths and Design Stresses for Thermoplastic Pipe and Fittings Compounds

Automotive Tube Fittings HVAC Duct Construction Standards - Metal and Flexible

Fibrous Glass Duct Construction Standard Vent or Chimney Connector Dampers for Oil-Fired Appliances LP-Gas Hose Heat Responsive Links for Fire Protection Service Power-Operated Pumps for Anhydrous Ammonia and LP-Gas Steel Tanks for Oil-Burner Fuel Factory-Built Chimneys for Residential Type and Building Heating Appliances Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief) Factory-Built Fireplaces Safety Relief Valves for Anhydrous Ammonia and LP-Gas LP-Gas Regulators Household Electric Storage Tank Water Heaters Liquid Level Indicating Gauges for Oil Burner Fuels Factory-Made Air Ducts and Air Connectors Closure Systems for Use with Rigid Air Ducts and Air Connectors Closure Systems for Use with Flexible Air Ducts and Air Connectors Commercial Electric Cooking Appliances [UMC 513.2.2] Non-Electrical Refrigerant-Containing Components and Accessories

Compressed Gas Regulators Smoke Detectors for Duct Application Oil Burners

Document info
Document views139
Page views139
Page last viewedSun Dec 11 00:23:22 UTC 2016
Pages49
Paragraphs570
Words16011

Comments