Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.
Install roller shades after finish work and ambient temperature, humidity and ventilation conditions are maintained at levels recommended for project upon completion.
Hardware and Shade Fabric: Draper's standard twenty-five year limited warranty.
Acceptable Manufacturer: Draper, Inc., which is located at: 411 S. Pearl P. O. Box 425 ; Spiceland, IN 47385-0425; Toll Free Tel: 800-238-7999; Tel: 765-987-7999; Fax: 866-637-5611; Email:; Web:
Substitutions: Not permitted.
Requests for substitutions will be considered in accordance with provisions of Section 01 60 00.
CRANK OPERATED WINDOW SHADES
Manually Operated Window Shades with Independent Control: Manually operated, vertical roll-up, fabric window shade with components necessary for complete installation; Manual FlexShade as manufactured by Draper, Inc.
Operation: Crank and gear box.
Gear box: Die cast aluminum and steel construction. Injection molded nylon and steel crank insert installed in roller to engage gear box.
Detachable anodized aluminum and chrome plated steel handle.
Permanently mounted anodized aluminum and chrome plated steel handle.
Size: 4 feet (122 cm).
Size: 6 feet (183 cm).
Size: 10 feet (305 cm).
Idler Assembly: Provide roller idler assembly of molded nylon with adjustable length idler pin to facilitate easy installation, and removal of shade for service.
Endcaps and fascia.
Endcaps and headbox.
Roller Tube: Fabricated from extruded aluminum, galvanized steel, or enameled steel. Diameter, wall thickness, and material selected by manufacturer to accommodate shade type and size. Fabric connected to the