X hits on this document

29 views

0 shares

0 downloads

0 comments

8 / 9

resistant vinyl film bonded to each side, opaque with minimum tensile strength of 190 pounds for warp and 180 pounds for fill. Fire rating: NFPA 701 1006-Test 1. Washable and stain resistant. Wt. 12 oz/sq yd. Same color both sides, .015 inches thick.

2.

SunBloc Series SB9100: Close woven fiberglass base textile with sun-resistant vinyl film bonded to each side, opaque with minimum tensile strength of 190 pounds for warp and 180 pounds for fill. Fire rating: NFPA 701 1006-Test 1. Washable and stain resistant. Wt. 12 oz/sq yd. White exterior in all colors, .013 inches thick.

3.

CL8000 (Colony): Close woven fiberglass base textile with sun-resistant vinyl film securely bonded to each side. Fire rating: NFPA 701 Test 1996-1. Washable and stain resistant. 90 percent opaque. 9.0 oz/sq yd., .014 inches thick. Fabric is white on outside.

4.

Flocke by Mermet: Opaque, PVC-free fiberglass textile with acrylic backing. 17.1 oz/sq yd, .024 inches thick. Fire rating: NFPA 701, both small- and large-scale tests. Antistatic treated. Draper shades made with this fabric are GreenSpec listed.

5.

Obion by Mermet: Translucent pvc free,  fiberglass textile with white exterior and soft woven interior. 10.03 oz/sq yd., .018 inches thick. Fire rating: NFPA 701, both small- and large-scale tests, TM#1/California U.S. Title 19.

6.

Roc-Rol by Rockland: PVC-free polyester-cotton blend, opaque. 13.5 oz/sq yd., .025 inches thick. Fire rating: NFPA 701. All colors are white on back side. U.S. Patent 5,741,582, Rockland Industries, Inc. Draper shades made with this fabric are GreenSpec listed.

7.

SheerWeave Series SW7000 by Phifer: PVC-free polyester with acrylic foamed backing. .018 inches thick, 10 oz/sq yd, opaque. Draper shades made with this fabric are GreenSpec listed.

8.

SheerWeave Series SW7100 by Phifer: PVC-coated Fiberglass laminated with a 2-ply PVC film. Fire rating: NFPA 701.023 inches thick, 19.8 oz/sq yd, opaque.

C.

Color and pattern:  __________, No. _____.

D.

Color and pattern: As indicated in Color Schedule on Drawings.

E.

Color and pattern: As selected by Architect from manufacturer's standard range.

PART  3

 EXECUTION

3.1

EXAMINATION

A.

Do not begin installation until substrates have been properly prepared.

B.

If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2

PREPARATION

A.

Coordinate requirements for blocking and structural supports to ensure adequate means for installation of window shades.

B.

Coordinate requirements for blocking, construction of shade pockets, and structural supports to ensure adequate means for installation of window shades.

C.

Coordinate installation of recessed shade pockets with construction of suspended

12494-8

Document info
Document views29
Page views29
Page last viewedSun Dec 04 12:35:27 UTC 2016
Pages9
Paragraphs365
Words3493

Comments