Gas RATA Observation Sheet Appendix A
Gas RATA Observation
1. Plant and RATA Information
State Plant ID:
2. Unit/System Information
3. RATA Observations
Unit Operation Conditions:
Check and record unit fuel and operating load. Is the load level stable throughout the RATA test?
The fuel should be a normal fuel listed in the monitoring plan (App. A, ' 6.5(a))
RATA should be performed at normal load. Check the load against the monitoring plan normal load.
Load During Test (Run/Load):
CEMS Calibration Error Test (Prior to the RATA)
Were any pre-RATA adjustments made to the CEMS?
Pre-RATA non-routine adjustments are allowed by Part 75. Adjustments may not be made between runs at a load level or between load levels except for routine adjustments as a result of the calibration error test (App. B ' 2.1.3).
Page A-14 Part 75 Field Audit Manual – July 16, 2003