X hits on this document

97 views

0 shares

0 downloads

0 comments

28 / 41

Flow RATA Observation Sheet                                                                                Appendix A

4.  RATA Observations (Method 2) (cont.)

RATA Checks

Observations

Are monitor and reference method data corrected to wet standard conditions?

Record calibration data and stack data in Tables 5 and 6.  

Record or obtain a copy of the results if test calculations are performed on site.  Check the RATA calculations (see 8 and 9).  Verify that the CEMS data and reference method data are for the same runs.

    5.  Equipment Calibration Data

Probe Type:

Value

Calibration Date

Pitot Cp (or F2 at zero pitch angle for 3D probe)

DGM Y Factor (if RM4 - condensation method)

    6.  Stack Data

Run Number:

a. barometric pressure (in Hg):

b. stack static pressure (in H2O):

c. stack temperature (F)

d. impinger vol (ml):

e. silica gel wt (g)

f. total moisture wt (g) (b + c)

g. CO2 (% dry volume)

h. O2 (% dry volume)

Page A-24                                                                                                      Part 75 Field Audit Manual - July 16, 2003

Document info
Document views97
Page views97
Page last viewedMon Dec 05 09:54:35 UTC 2016
Pages41
Paragraphs991
Words7648

Comments