X hits on this document

PDF document

Mobil DTE 800 Series - page 3 / 3

7 views

0 shares

0 downloads

0 comments

3 / 3

832 10,000+ 1200 9

846 10,000+ 1100 9

Pass Pass 15 1A 20/0 2

Pass Pass 15 1A 20/0 2

Mobil DTE 800 Series TOST, ASTM D 943, Hours to 2 NN RBOT, ASTM D 2272, min. FZG Scuffing, DIN 5182, A/8.3/90, Fail Stage Rust Prevention, ASTM D 665:

Distilled Water Sea Water Water Seperability, ASTM D 1401, Min. to 0 ml emulsion @ 54º C Copper Strip Corrosion, ASTM D 130, 3 hrs @ 100º C Foam Test, ASTM D 892, Seq I, II & III Tendency/stability, ml/ml Air Release, mins.

Health & Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

The Mobil logotype, the Pegasus design and Mobil DTE are trademarks of ExxonMobil Corporation, or one of its subsidiaries.

ExxonMobil Lubricants & Specialties All products may not be available locally. For more information, contact your local sales office or visit www.exxonmobil.com. ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities. Due to continual product research and development, the information contained herein is subject to change without notification. Typical Properties may vary slightly. © 2001 Exxon Mobil Corporation. All rights reserved.

Document info
Document views7
Page views7
Page last viewedTue Oct 25 22:49:41 UTC 2016
Pages3
Paragraphs53
Words1196

Comments