Introduction and equipment overview
Handymax Cargo Hold Cleaning Kit – complete solution for hold cleaning
The Unitor Cargo Hold Cleaning Kit has been developed in order to facilitate cargo change-over on board small to medium bulk carriers. The kit consists of all necessary equipment needed for a complete cleaning operation. The kit is supplied ready to use in a shock proof plastic container which can be easily transported between vessels. The equipment has been designed for application of both cleaning chemicals and temporary coatings as well as rinsing and wash down.
Technical data Property Recommended air pressure Air consumption (max) Chemical coverage
Unit bar m3/min m2/min
Value 5-7 0,6 * 100
Air connection Shipping size Weight
inch cm kg
3/4" BSP male with Quick connector 130x91x80 (HxWxD) 32
- lower air volume will reduce the chemical coverage per minute.
Ordering information Handymax Cargo Hold Cleaning Kit
Double Diaphragm pump 1040
Long Reach Lance 2,4m with 3 nozzles Medusa air distributor 5m 1" suction hose 40m 3/8” Air hose with quick connectors 10m 3/8” Air hose with quick connectors 50m ¾” Chemical hose with quick connectors 550litre plastic container
Revision date: 04/2008
Page 3 of 21