X hits on this document

PDF document

How To Aim Headlamps and Auxiliary Lamps - page 3 / 7

22 views

0 shares

0 downloads

0 comments

3 / 7

39.5" or higher (100 cm)

4.5" (114 mm)

US DOT headlamps marked VOL

Up to 34.5" (80 cm)

2.1" (53 mm)

35" to 39" (89-99 cm)

3" (76 mm)

39.5" or higher (100 cm)

3.5" (89 mm)

US DOT headlamps marked VOR, and mechanical aim low or high/low beam lamps

Up to 34.5" (80 cm)

N/A, do not measure downward

35" to 39" (89-99 cm)

2" (50 mm)

39.5" or higher (100 cm)

3" (76 mm)

US DOT headlamps marked VO, Mechanical-aim high-beam-only lamps, and Driving (auxiliary high beam) lamps

Any mount height (80cm)

N/A, do not measure downward

Daniel Stern Lighting Consultancy and Supply

12/04/2006 01:48 PM

Connect these two newly-measured points with a horizontal line we'll call "B-B". After you've done all of this, your wall will be marked like this for a system of two high/low beam headlamps:

Fog lamps

Up to 18" (46 cm)

    • 18.5

      " to 28" (47-71 cm)

    • 28.5

      " or higher (72 cm)

4" (102 mm)

1.5" (38 mm)

3" (76 mm)

Or like this for a system of two low- or low/high beam plus two high- beam lamps:

http://www.danielsternlighting.com/tech/aim/aim.html

Page 3 of 7

Document info
Document views22
Page views22
Page last viewedTue Jan 17 09:15:59 UTC 2017
Pages7
Paragraphs102
Words1939

Comments