X hits on this document





4 / 10

Special Edition, Inc.

Home of the Beck Speedster

Deluxe Pre-Assembled Body Package

Starting at $19,500

What is it?

F.O.B. Bremen, Indiana

The “Deluxe Pre-Assembled Body Package” program provides the specialty automotive enthusiast with a quality product, in a complete and comprehensive package. This alternative affords a savings over the “Roller” or “Turn Key” versions by allowing you, the customer, to supply a portion of the labor relating to the final assembly procedure, yet does not demand an inordinate amount of specialized skills or professional assistance such as painting, wiring, and upholstery.

This package includes ALL of the following:

  • o

    The complete hand-laid fiberglass body, painted with Sikkens base coat/ clear coat to automotive standards. The doors, front hood with support rod, and rear deck lid with support rod are hinged, latched, weather stripped and fully adjusted.

    • o

      The body comes pre-mounted to a 3” tubular steel frame that is an integral part of the body/chassis system. It includes a fully adjustable front axle beam with torsion bars installed and rear suspension components complete to the spring plate assemblies. Tubular steel is an extremely strong method of construction and gives the Beck Speedster excellent torsional rigidity resulting in crisp handling, consistent door gap, and superior fit and finish. It is a logical and preferable construction method to “belly pan” mounted kits.

    • o

      The self-parking, 2-speed windshield wiper system is completely installed and wired.

    • o

      All of the wiring for major components is completely installed. This includes the 3-gauge cluster, all switches, relays, engine harness, lighting and a complete fuse panel.

    • o

      The steering column with turn signal, emergency flasher and wiper switch is installed.

    • o

      The convertible top with steel scissor frame is completely assembled, installed, and operational. Matching 5mm Lexan side curtains are also included.

    • o

      Full leather interior is complete including door panels with full-length map pockets, adjustable bucket seats, dash, leather wrapped steering wheel, shifter and emergency brake boots.

    • o

      The interior is completely carpeted, as is the front storage area. A set of Beck speedster floor mats is also included.

    • o

      The accelerator, clutch, heater control, emergency brake, and speedometer cables are installed.

    • o

      The shift mechanism is complete to the nose cone access panel.

    • o

      The fuel tank, gas cap, and brake reservoir are installed in the front compartment.

    • o

      Dual circuit master cylinder with all brake lines is installed.

    • o

      Complete pedal assembly is installed.

The “DELUXE PRE-ASSEMBLED BODY PACKAGE” is extremely complete. The builder need only supply the engine of his choosing, a transaxle, minor suspension components, wheels, tires, fluids, lighting, and some hardware (all available in the optional packages), some basic mechanical ability and approximately 25 to 30 hours of assembly time.

Prices are subject to change without notice. A $5,000.00 deposit must accompany all orders. Please call for availability. Special Edition, Inc. 1347 West North Street Bremen, Indiana 46506 (574) 546-4656 - Shop www.BeckSpeedster.com

Effective January 1, 2010

Document info
Document views16
Page views16
Page last viewedSun Oct 23 00:20:34 UTC 2016