X hits on this document

128 views

0 shares

0 downloads

0 comments

26 / 61

Foreign Disclosure 1

1.

PUSHED REMOTE SWITCH, WON’T COME ON

2.

TURNED ON SELECTOR SWITCH WON’T COME ON

3.

AN/PEQ-2A WON’T STAY ON CONTINUOUSLY

4.

TOO MUCH BLOOMING ON ZERO TARGET

5.

AIMING LIGHT TOO DIM DOWN RANGE

6.

ILLUMINATOR IS NOT ON

7.

YOU CAN SEE TWO AIMING POINTS DOWN RANGE

8.

IN DUAL LO YOU CAN’T FIND THE ILLUMINATOR

9.

ILLUMINATOR DOESN’T ILLUMINATE AIMING POINT

10.

IN AIM LO YOU GET TWO AIMING POINTS

8. YOU NEED TO REMOVE THE ILLUMINATOR FILTER

OR

REDUCE THE ILLUMINATOR SIZE

3. YOU DIDN’T DOUBLE TAP THE ACTIVATOR SWITCH

4. NEED TO INSTALL AIMING POINT FILTER

5. YOU NEED TO REMOVE THE AIMING POINT FILTER

6. YOUR NOT IN DUAL LO

7. YOU NEED TO EXPAND THE ILLUMINATOR

9. YOU NEED TO ZERO THE ILLUMINATOR

10. YOU NEED TO CLEAN THE AIMING POINT LENS

2. DIDN’T PUSH ACTIVATOR SWITCH

1. SELECTOR LEVER IS OFF

Document info
Document views128
Page views128
Page last viewedMon Dec 05 11:05:04 UTC 2016
Pages61
Paragraphs499
Words2155

Comments