X hits on this document

64 views

0 shares

0 downloads

0 comments

8 / 24

16 Mounting

8

Mounting

19" Plug-In Card

Caution The device may only be operated when fully assembled and installed.

The „19" plug-in card“ version of the device (width 18T) has been designed for installation in a 19" subrack. One subrack can accommodate a total of four devices.

Before installation: Mount spring-contact strips (design F) in the subrack acc. to the spa- cing of the blade connector arrangement (Fig. 16-2).

Basic version: 2 spring-contact strips, Version with I/O extension card: 3 spring-contact strips.

Insert the device firmly into spring-contact strips of the slot provided and secure it using the five screws located on the front panel.

Fig. 16-1 19" plug-in card, front view

power supply board

motherboard

I/O - extension module

12.8

20.3

61

173.6

Z-177531

Fig. 16-2 Dimensional drawing of 19" plug-in card (dimensions in mm)

Document info
Document views64
Page views64
Page last viewedThu Dec 08 08:20:00 UTC 2016
Pages24
Paragraphs616
Words3638

Comments