X hits on this document

101 views

0 shares

0 downloads

0 comments

7 / 24

In-Block

Direct Immersion Heaters

Note: In-block heaters are complete with 2-wire w/ground 6 foot HPN cord and plug. For cord replacements or “Y” thermocord energy saver, please reference page 12.

Engine Model

Part Number 120 Volts

Cummins A 4 cyl & 6 cyl

CUA-101F

Part Number 240 Volts

Watts

Product Image

Application Information

Additional Cummins Engine Models

CUA-102F

1000

Inserts in any of the freeze plugs on right side of engine.Element points down.

Heat Shield

Oil Heater

Required

Thread Size*

DD8L-101

DD8L-102

1000

CUL-151

CUL-152

1500

3/4”NPT threaded plug in the right rear side of engine

22mm

Inserts in the forward opening of the heater casting on the right rear of block

1” NPT

ISC/QSC 8.3L ISL/QSL 9.0L

L10, M11 ISM

TF751-002

TF752-002

750

PF151-003

PF152-003

1500

3/4”NPT threaded plug in the front of the oil cooler casting

22mm

Right rear.Replaces plate.

1” NPT

QSB 3.9L, 5.9L ISB 5.9

ISM/QSM 11.0L Flat Plate Design

QSX, ISX Signature 600

PF151-004

PF152-004

1500

4BT 3.9L

CUB-751FP CUB-101FP

CUB-752FP CUB-102FP

750 1000

6BT 5.9L

CUB-751FP CUB-101FP CUB-151FP

CUB-752FP CUB-102FP CUB-152FP

750 1000 1500

6CT 8.3L

CUC-151FP

CUC-152FP

1500

SERIES 10 4 cylinder Phaser engines

PER-751FP PER-101FP

PER-752FP PER-102FP

750 1000

SERIES 10 6 cylinder Phaser engines

PER-151FP

PER-152FP

1500

SERIES 30

DD8L-101

DD8L-102

1000

SERIES 40 all versions

PER-751FP INTA-121 FR151-001

PER-752FP INTA-122 FR152-001

750 1250 1500

SERIES 50 SERIES 60

AC-101 CATV-151

AC-102 CATV-152

1000 1500

SERIES 55

PF151-000

PF152-000

1500

3-53, 4-53, 3-71, 4-71 with water cooled air compressor

DD-751-S

DD-752-S

750

Mounts in the“football shaped”plate on the right side of the block

Inserts in any of the freeze plugs right side of engine

Inserts in any of the freeze plugs right side of engine

Mounts in the 1 1/4”freeze plug opening on either side of the engine

Mounts in the 1 1/2”freeze plug on the right side of the engine

Detroit Diesel

Inserts in the freeze plug right rear of the block

27mm

Mounts in the 3/4”NPT opening in the block

Mounts in the frost plug opening on the left side of the engine

Mounts in the 1”NPT opening in either water pick up pipe (up to 1991) or in the 1”NPT opening on the oil cooler housing after 1991

Mounts in the triangle plate on the side of the block

Mounts in the“football shaped”plate on the block.Check clearance.

yes on 1991 and later

3/4” NPT

  • *

    If supplemental oil heating is desired, this column gives the correct thread size in oil pan. See NOTE on page 11.

Customer Support: (509) 536-8660

Toll-Free FAX: (800) 224-5550

www.kimhotstart.com

7

Check Exhaust Routing

22mm

Check Exhaust Routing

22mm

22mm

Document info
Document views101
Page views107
Page last viewedSat Dec 10 05:04:44 UTC 2016
Pages24
Paragraphs1912
Words7545

Comments