X hits on this document

100 views

0 shares

0 downloads

0 comments

9 / 24

In-Block

Direct Immersion Heaters

Note: In-block heaters are complete with 2-wire w/ground 6 foot HPN cord and plug. For cord replacements or “Y” thermocord energy saver, please reference page 12.

Engine Model

Part Number

Part Number

120 Volts

240 Volts

Watts

Product Image

Application Information

Heat Shield

Oil Heater

Required

Thread Size*

Ford Lehman (English)

4 AND 6 CYL engines

FP531-002 FP751-000 FP101-002

FP532-002

530

FP752-000

750

FP102-002

1000

Mounts in freeze plug in the block

Hino

With 3/4”plug in the

JD3/4-101IN

JD3/4-102IN

1000

back of the block

JD3/4-151IN

JD3/4-152IN

1500

DD8L-101

DD8L-102

1000

TF401-501

NONE

400

    • 3.8

      L, 5.8L, 6.0L, 6.4L,

    • 6.7

      L,W04C-T,W06E,

H06C-T, H07C-B

Isuzu

Threads into 3/4”NPT opening in the block

YES

1”NPT opening in left rear of engine No replacement cord available

4BD1 6BD1 6BG1

6HE1 6SA1

John Deere

3/4”NPT opening in the rear face of the block

check Exhaust routing

With 1”plug in the back of the block

JD1-101IN JD1-151IN

JD1-102IN JD1-152IN

1000 1500

With 1 5/8”opening on the side of the water jacket

JDS-101

JDS-102

1000

6105 (10.5L) 6125 (12.5L)

AC-101 CATV-151

AC-102 CATV-152

1000 1500

L10 (10L) M11(11L)

CUL-151

CUL-152

1500

1”NPT opening in the rear face of the block

1 5/8”threaded opening on the side of the block in the water distribution channel

1”NPT opening in the oil cooler casting

Komatsu

Inserts in the forward opening of the heater casting on the right rear of the block

MA-151

MA-152

1500

Kubota

TF401-501

N/A

400

MAM-101

MAM-102

1000

Mack

SA6D125

M, B, L Series

Mid liner E3 MS200 & MS250

Threads into the freeze plug opening in the block

1”NPT opening in left rear of engine No replacement cord available

Mounts in rear face of block

D905

V1205

D1005

V1305

D1105

V1505

D3000B

V4000B

D3200B

V4300B

DH905

VH1205

DH1005

VH1305

Mid liner E5 MS300

MAM-151

MAM-152

1500

Mounts in the oil cooler bonnet

  • *

    If supplemental oil heating is desired, this column gives the correct thread size in oil pan. See NOTE on page 11.

Customer Support: (509) 536-8660

Toll-Free FAX: (800) 224-5550

www.kimhotstart.com

9

Document info
Document views100
Page views106
Page last viewedSat Dec 10 04:39:21 UTC 2016
Pages24
Paragraphs1912
Words7545

Comments