MARTECH RCD PRO
From the radio screen appears the code 0592, after a short while will approve the OK button code. If the test is not correct - check the connection point 3
7. Now you should turn off power supply for 10 seconds, then connect wires again. Radio should be turned off. 8. Select Find Code – Slow Mode This function searches for the radio code according to the parameters by the user. There we have the possibility of search settings in auto mode or manual. Auto mode searches for code since 0000, while in manual mode you can set your code, from which the search will take place. For this purpose, press Change and using CLIP keys: UP and DN, set the appropriate value of the initial code. It should be noted that a single push of a code increment the value of the unit, and longer holding the key UP or DN will increase in increments of code 10th.
Hit Start - search process starts.